Teak Heavy-Duty Composite Privacy Gate Kit | Keypad Lock Included | Single & Double Swing Fence Gate
Teak WPC Composite Slat Infill. Powder-Coated Black Steel Frame. Mechanical Keypad Lock Included with Every Kit.
A great fence deserves an equally great gate, and one that actually matches it. The Teak Heavy-Duty Composite Privacy Gate Kit is the purpose-built entry companion to our Teak Heavy-Duty Slat Composite Fence Panels, carrying the same warm teak wood-grain composite slat profile through every access point on your property. A powder-coated black architectural metal frame adds structure and a clean modern contrast, while a mechanical keypad lock with key backup is included in every kit so you’re not hunting for compatible hardware after installation.
Two gate configurations cover single side-yard entries and wide double openings. Both can be installed with slats running vertically or horizontally to coordinate with your existing fence layout. Every kit ships unassembled for efficient freight handling; on-site assembly is straightforward with standard tools.
What’s Included: Single Swing Gate Kit
- 2× Steel gate posts with base plates: 70-5/8" long, 3-1/8" × 3-1/8" post, 5-1/8" base plate, ¼" thick steel
- 2× Fence-to-gate post C-channels: 70-13/16" long, 1-9/16" wide, 3/8" deep (attaches adjoining fence to gate posts)
- 2× Top & bottom gate frame rails: 38-7/8" long, 2-13/16" wide, 1¾" deep channel
- 2× Vertical gate frame rails: 67-1/8" long, 2-13/16" wide, 1¾" deep channel
- 8× Heavy-duty sleeve anchors: 5" long, for securing post base plates to concrete
- 3× Heavy-duty gate hinges with mounting hardware
- 1× Mechanical keypad gate lock set: keyless entry with mechanical key backup and lever handle
- 1× Gate drop rod / cane bolt: ground-engaging locking bolt to secure gate in closed position
- 1× Heavy-duty gate caster wheel: supports gate weight and assists smooth opening and closing
- 4× Gate frame corner brackets: metal brackets that connect and reinforce the gate frame
- Plastic hole plugs: covers exposed mounting and access holes
- 2× Plastic post caps: covers and finishes the tops of the steel gate posts
- 6× WPC composite slat panels: 78½" × 6" each, for vertical or horizontal installation (must be cut to size on-site)
- All screws, fasteners, and assembly hardware
Double Swing Gate includes 12 WPC panels (6 per gate leaf), a keypad lock set, a drop rod, and all structural hardware.
Gate Dimensions
| Configuration |
Clear Opening |
Post to Post |
Base to Base |
Total Height |
Keypad Lock |
Price |
| Single Swing Gate |
37" (940 mm) |
45-1/8" (1146 mm) |
49-1/8" (1248 mm) |
70-7/8" (1800 mm) |
Included |
$499 |
| Double Swing Gate |
74" (2 × 37", 1880 mm) |
91¼" (2318 mm) |
95-7/16" (2424 mm) |
70-7/8" (1800 mm) |
Included |
$849 |
All dimensions are approximate. Verify all measurements before installation and allow for installation tolerances and hardware clearances.
Key Features
- Teak WPC composite slat infill, matches Teak Heavy-Duty Slat Composite Fence Panels
- Powder-coated black architectural metal frame and posts
- Mechanical keypad lock with key backup and lever handle, included with every kit
- Heavy-duty 3-point swing hinges
- Heavy-duty gate caster wheel for smooth, supported operation
- Gate drop rod / cane bolt for securing gate in closed position
- Steel gate posts with anchor base plates, surface-mount to concrete
- Fence-to-gate C-channels for seamless connection to adjoining fence sections
- Install slats vertically or horizontally to match your fence layout
- WPC composite panels: UV-resistant, moisture-resistant, rot-proof, insect-proof
- No painting, staining, or sealing required, ever
- Ships unassembled; on-site assembly with standard tools
- Ships from San Diego, CA
Product Specifications
| Specification |
Details |
| Color / Finish |
Teak |
| Panel Material |
WPC Composite (wood fiber + polymer) |
| Panels Included (Single) |
6 panels (78½" × 6" each) |
| Panels Included (Double) |
12 panels (78½" × 6" each, 6 per leaf) |
| Panel Orientation |
Horizontal or Vertical |
| Frame Material |
Powder-coated architectural metal |
| Post Size |
3-1/8" × 3-1/8" steel |
| Post Height |
70-5/8" |
| Base Plate |
5-1/8" wide, ¼" thick steel |
| Lock |
Mechanical keypad with key backup and lever handle, included with every kit |
| Bottom Clearance |
~2.6" (65 mm) |
| Application |
Exterior, Residential & Light Commercial |
| Assembly |
Ships unassembled; on-site assembly required |
| Compatible With |
Teak Heavy-Duty Slat Composite Fence Panels |
| Ships From |
San Diego, CA |
Installation
All gates ship unassembled. On-site assembly is required and achievable with standard hand tools. Post base plates are designed for surface-mount installation to concrete using the included sleeve anchors. Fence-to-gate post C-channels allow your existing fence sections to connect seamlessly to the gate posts on either side.
WPC composite panels are supplied oversized at 78½" × 6" and must be cut down to the required finished dimensions during installation. Measure carefully before cutting. Panels that have been cut cannot be returned or exchanged. The gate caster wheel supports the gate leaf weight and keeps the gate operating smoothly over time.
Professional installation is recommended for larger or more complex projects. Always verify finished opening dimensions, ground clearance, and post spacing before beginning installation.
Why YouShouldHaveIt
- Ships from San Diego, CA warehouse
- In-stock, same or next business day shipping
- Volume discounts at checkout
- Expert team: (858) 261-4068, Mon–Fri 8am–4pm
- Retail showroom in Santee, CA
Frequently Asked Questions
Q: Does the gate ship assembled?
A: No, all gates ship unassembled. On-site assembly with standard tools is required.
Q: Does the Double Swing Gate include a keypad lock?
A: Yes, both the Single and Double Swing Gate kits include a mechanical keypad lock with key backup and lever handle. Every kit ships with the lock included.
Q: How many WPC panels are included?
A: The Single Swing Gate includes 6 WPC panels (78½" × 6" each). The Double Swing Gate includes 12 panels (6 per gate leaf). Panels are supplied oversized and must be cut to your finished dimensions on-site.
Q: Can the panels run horizontally or vertically?
A: Yes, both orientations are supported. Match whichever layout your existing fence uses for a seamless look.
Q: Does this gate match the Teak Heavy-Duty Slat Composite Fence Panels?
A: Yes, this gate is purpose-built to coordinate directly with the Teak Heavy-Duty Slat Composite Fence Panel system.
Q: What is the clear opening width?
A: The Single Swing Gate provides a 37" (940 mm) clear opening. The Double Swing Gate provides a 74" clear opening (37" × 2 leaves).
Q: What is the total gate height?
A: Both the Single and Double Swing Gate are approximately 70-7/8" (1800 mm) total height.
Q: How are the posts installed?
A: The steel gate posts include base plates that surface-mount to concrete using the included heavy-duty sleeve anchors. The base plate footprint is approximately 5-1/8" wide and ¼" thick.
Q: Can I cut the WPC panels to a shorter height?
A: Yes, the panels can be cut with a circular saw, miter saw, or jigsaw. Measure carefully before cutting. Panels that have been modified cannot be returned.
Q: Is the gate weather resistant?
A: Yes. The WPC composite slat panels resist UV fading, moisture, rot, mold, and insects. The frame is powder-coated steel. No painting, staining, or sealing is ever required.
Q: Do I need a professional installer?
A: The system is designed for DIY assembly with standard tools. Professional installation is recommended for larger or more complex projects.
Q: Where does it ship from?
A: All gates ship from our warehouse in San Diego, CA. In-stock orders dispatch same or next business day. Free shipping on all contiguous US orders.
Q: Do you have a showroom where I can see it in person?
A: Yes, 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.
Explore More Products
Discover more premium home improvement solutions designed for durability, style, and performance.
