Walnut Slat Wood Wall Panels - (94" Long) x (5 3/4" Width)

Walnut Slat Wood Wall Panels Pre-Finished Solid Wood Wall Paneling

Real Solid Wood. Rich Walnut Finish. A Dark, Warm Tone Ready to Install.

Transform any interior wall with our Walnut Slat Wood Wall Panels — real solid wood cladding panels pre-finished in a rich, deep walnut tone. The smooth walnut veneer finish delivers a warm chocolate-brown wood color with natural grain variation that reads as sophisticated and grounded from any distance. Install directly without any staining or finishing — the panels arrive ready to go straight onto the wall.

Each box contains 3 panels and an end cap panel, covering 12 sq ft. The vertical slat design adds depth, texture, and architectural dimension to any wall surface, and because the panels connect seamlessly with no visible joint lines, the finished result looks like it was built into the space.

Key Features

• Real solid wood construction with smooth premium walnut veneer finish
• Pre-finished in rich walnut — deep, warm chocolate-brown, ready to install
• Seamless panel-to-panel connection — no visible joint lines
• 5¾" wide slats with 3/4" thickness
• Water-resistant material
• 94" box includes end cap panel for clean edge finishing
• Install horizontally or vertically on any wall surface
• Cut to fit with standard woodworking tools
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Walnut

Walnut is the go-to finish for spaces that want warmth without lightness and richness without going full black. The deep chocolate-brown tone grounds a room immediately — it adds weight, sophistication, and a sense of material quality that lighter wood finishes don't deliver in the same way. The smooth walnut veneer surface shows natural grain variation, so no two panels are identical. Against white or off-white walls, walnut creates one of the most classic and high-contrast looks in interior design. Against warm, earthy tones — terracotta, clay, warm cream — it becomes part of a layered, natural palette that feels genuinely considered. The four-slat format creates shadow lines between each plank that amplify the depth of the dark finish and give the wall a three-dimensional quality that a painted surface simply cannot replicate.

• Living room and bedroom accent walls
• Home offices and executive offices
• Bars, restaurants, and hospitality interiors
• Hotel lobbies and retail spaces
• Conference rooms and commercial environments
• Kitchen design features and media room walls

Product Specifications

Box Contents

Coverage Calculator

94" Length (12 sq ft per box)

How to Install Walnut Slat Wood Wall Panels

Installation is a straightforward DIY process that most homeowners and contractors can complete in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. A properly prepared surface ensures the adhesive bonds securely and the panels stay flat over time.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall — this guides the first panel and keeps the entire installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced, symmetrical result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel in vertical lines. Keep adhesive away from the edges to prevent squeeze-out. Ensure even distribution for a strong, uniform bond.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. The first panel sets the alignment for everything that follows — use a level to confirm it's perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The precision panel design creates a seamless connection with no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a circular saw, miter saw, or fine-tooth hand saw. Measure carefully before each cut to maintain clean edges.

Step 8: Install End Caps

Use the included end cap panel to finish exposed edges cleanly on the perimeter of the installation. This gives the wall a polished, built-in appearance.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA

Frequently Asked Questions

Q: What does the Walnut finish look like?

A: The Walnut finish is a rich, deep chocolate-brown with natural wood grain variation. It's warm and dark — not a light or mid-tone brown. The smooth veneer surface shows the grain character that makes walnut one of the most distinctive and desirable wood tones in interior design.

Q: Is this a pre-finished panel or do I need to apply a finish after installation?

A: These panels arrive pre-finished in Walnut — no staining, painting, or sealing required. Unbox, cut to fit, and install. The walnut finish is factory-applied and ready to go directly onto the wall.

Q: How does Walnut compare to the Unfinished panels?

A: The Unfinished panels are raw solid wood with no color applied — ideal if you want to stain or paint a custom color. The Walnut panels arrive pre-finished in a rich dark brown tone and are ready to install immediately. Choose Unfinished for a custom match; choose Walnut for a classic, dark wood look with no finishing work.

Q: Can I paint or stain over the Walnut finish?

A: Yes — since these are solid wood, they can be painted or stained like any wood surface. However, the pre-applied walnut finish means you'd typically be painting over it rather than starting from raw wood. If you want a fully custom color, the Unfinished panels are a better starting point.

Q: Is an end cap included?

A: Yes — each box includes one end cap panel (94" × 0.8") for finishing exposed edges on the perimeter of the installation.

Q: Is this available in 106"?

A: The Walnut panels are available in 94" only. This length suits standard 8' ceiling heights and can be stacked for taller walls. Contact our team at (858) 261-4068 if you have questions about tall-wall installations.

Q: Do these panels help with sound control?

A: These are cladding panels, not acoustic panels — they don't include sound-absorbing felt backing. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Can the panels be cut to fit?

A: Yes. Use a circular saw, miter saw, or fine-tooth hand saw to trim panels around outlets, corners, or at wall edges.

Q: Are these panels water resistant?

A: Yes — the solid wood construction is water-resistant. These panels are designed for interior use and are not rated for exterior or wet-area applications.

Q: How long does installation take?

A: Most single accent wall installations can be completed in a few hours with proper preparation.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.