7 Grid Driftwood Slat Wood Wall Panels - 94.5" - 106" Long x 5 3/4" Width

7 Grid Driftwood Slat Wood Wall Panels

Seven Slats Per Panel. Weathered Gray-Brown Driftwood Finish. Relaxed Texture, Ready to Install.

Bring a natural, organic character to any interior wall with our 7 Grid Driftwood Slat Wood Wall Panels — pre-finished in a soft, weathered gray-brown Driftwood tone and featuring seven narrow slats per panel for a finer, denser surface pattern. Where the 4-grid Stout profile uses four bold slats for a strong architectural shadow effect, the 7-grid format packs seven slimmer slats across the panel width, creating a more subtle, layered texture that adds quiet depth without dominating the room. The Driftwood finish is pre-applied at the factory, so panels arrive ready to install with no staining or painting required.

Available in 94.5" and 106" lengths with 4 panels per box. The seamless panel-to-panel connection leaves no visible joint lines, giving the finished wall a clean, effortless look from edge to edge.

Key Features

• 7-slat ridge pattern per panel for finer, denser surface texture
• Pre-finished in weathered gray-brown Driftwood with a smooth laminate surface
• Ready to install — no staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 0.5" thickness
• 4 panels per box for both 94.5" and 106" lengths
• Scratch-resistant laminate surface finish
• Install horizontally or vertically on walls or ceilings
• Cut to fit with standard woodworking tools
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Driftwood

Driftwood is the finish for spaces that want natural material character without any traditional wood warmth. The weathered gray-brown tone reads as relaxed and organic — it brings the texture and variation of wood without the honey or chocolate tones of oak and walnut finishes. Against white and bright walls it creates a soft, low-contrast look that adds depth without drama. Against warm neutrals it acts as a natural bridge between cool grays and warm wood tones. The 7-grid slat pattern amplifies this sensibility: seven narrow ridges per panel create a finely textured surface that catches light subtly, adding dimension while keeping the overall effect calm and understated. If you've been drawn to whitewash, gray-wash, or wire-brushed wood finishes, the 7 Grid Driftwood delivers that sensibility in a ready-to-install panel suited to both residential and commercial interiors.

• Coastal and beach-style interiors
• Bedrooms and living room accent walls
• Home offices and study rooms
• Bars, restaurants, and hospitality spaces
• Hotels, lobbies, and boutique retail
• Hallways, stairwells, and accent walls

4 Grid vs. 7 Grid: Which Slat Pattern Is Right for Your Project?

Product Specifications

Box Options

Coverage Calculator

94.5" Length (15.1 sq ft per box)

106" Length (17.6 sq ft per box — 15-box minimum)

How to Install 7 Grid Driftwood Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. A properly prepared surface ensures the adhesive bonds securely and the panels stay flat over time.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The precision panel design creates a seamless connection with no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a circular saw, miter saw, or fine-tooth hand saw. Measure carefully before each cut to maintain clean edges.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Driftwood surface requires no additional finishing — the installation is complete.

7 Grid Driftwood Slat Wood Wall Panels Gallery

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA

Frequently Asked Questions

Q: What does the Driftwood finish look like?

A: Driftwood is a soft, weathered gray-brown — it mimics the look of sun-bleached, naturally aged wood. It's lighter and cooler than any traditional warm wood tone but warmer than a pure gray. The result is a relaxed, organic character that reads as coastal, Scandinavian, or organic modern depending on the rest of the room.

Q: How does the 7 Grid pattern differ from the 4 Grid (Stout)?

A: The 4 Grid Stout uses four wider slats per panel, creating bold, well-defined shadow lines. The 7 Grid packs seven narrower slats across the same width, producing a finer, more subtle texture. The 4 Grid reads as more architectural and dramatic; the 7 Grid is quieter and more refined, letting the finish carry the visual character.

Q: How does the 7 Grid Driftwood compare to the solid wood Driftwood panels?

A: Both share the same Driftwood color finish. The solid wood Driftwood cladding panels use the Stout 4-grid profile (5¾" wide, 3/4" thick, 3 panels + end cap per box). The 7 Grid Driftwood uses the finer 7-grid pattern (5¾" wide, 0.5" thick, 4 panels per box, no end cap). Choose based on your preferred slat texture: bolder and thicker with the 4-grid, finer and more subtle with the 7-grid.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Driftwood and are ready to install straight from the box. No staining, painting, or sealing required.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Is there a minimum order?

A: No minimum on the 94.5" length. The 106" length has a 15-box minimum order. A sample is available before committing to a full order.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, the panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.