7 Grid Gray Slat Wood Wall Panels

7 Grid Gray Slat Wood Wall Panels

Seven Slats Per Panel. Solid Medium Gray Finish. Clean, Contemporary, Ready to Install.

Add a clean, modern edge to any interior with our 7 Grid Gray Slat Wood Wall Panels — pre-finished in a consistent, ultra-smooth medium gray and featuring seven narrow, low-profile slats per panel for a refined architectural texture. Gray is the only solid-color finish in our 7-grid lineup. Where every other color showcases natural wood grain variation, Gray delivers a uniform, paint-like surface that reads contemporary, calm, and precise from panel to panel. No grain variation, no warm or cool undertones fighting each other — just a clean neutral gray that anchors modern interiors without visual noise. The Sleek 7-grid profile pairs perfectly with this finish: on a solid color, the shadow lines from the slat ridges are the entire visual story — pure architectural texture, nothing competing with it.

Available in 94.5" and 106" lengths with 4 panels per box. Order a sample first — Gray reads very differently under warm vs. cool lighting, and seeing it in your actual space before committing to full boxes is always the right call.

Key Features

• Sleek 7-grid slat pattern — 7 low-profile slats (9.5mm) per panel for fine, subtle texture
• Pre-finished in solid medium Gray with an ultra-smooth, paint-like surface
• Only solid-color finish in the 7-grid lineup — no grain variation, uniform from panel to panel
• Solid wood construction with solid-color veneer finish
• Ready to install — no painting, staining, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 7/16" thickness
• Slat size: 9.5mm × 9.5mm × 6.3mm
• 4 panels per box for both 94.5" and 106" lengths
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Interior use only — ships from San Diego, CA

Why Gray

Gray is the contemporary choice in the 7-grid collection — and the only one that doesn't show wood grain. Every other finish in the lineup (Light Brown, Dark Chestnut, Dark Brown Oak, Light Oak, Driftwood, Black, Unfinished) has natural grain variation built into the surface. Gray breaks that pattern entirely with a uniform, solid-color finish that reads more like painted plaster or polished concrete than wood veneer. The slat texture is still very much present — seven narrow ridges per panel creating shadow lines and depth — but the grain is completely absent, making it the right choice when you want texture without warmth, dimension without rusticity. It pairs naturally with white and off-white walls, black and charcoal accents, concrete, stone, and polished metal finishes. Because it's a solid color rather than a wood grain, it doesn't compete visually with patterned textiles or busy decor — it anchors the room and lets everything else breathe.

• Modern and minimalist living rooms — a clean, neutral backdrop that anchors without competing
• Home offices and conference rooms — professional, calm, and focused
• Bedroom feature walls — cool, sophisticated tone for contemporary palettes
• Kitchens with white or light cabinetry — gray adds depth without warmth
• Hotels, apartments, and commercial spaces — universally neutral, versatile
• Home theaters and media rooms — minimal visual distraction, strong architectural presence

Compare 7 Grid Colors

Product Specifications

Box Options

Coverage Calculator

94.5" Length (15.1 sq ft per box)

106" Length (17.6 sq ft per box — 15-box minimum)

How to Install 7 Grid Gray Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut. The solid-color finish means cut edges can be touched up with a matching gray paint if needed.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Gray surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What does the Gray finish look like?

A: Gray is a medium gray with an ultra-smooth, solid-color surface — no wood grain, no texture variation, no warm or cool undertones fighting each other. It reads clean, contemporary, and precise. Order a sample to see it in your space under your actual lighting before committing to full boxes — gray can shift noticeably between warm and cool light sources.

Q: How is Gray different from the other 7 Grid colors?

A: Gray is the only solid-color finish in the lineup. Every other 7 Grid color (Light Brown, Dark Chestnut, Dark Brown Oak, Light Oak, Driftwood, Black, Unfinished) features natural wood grain visible in the surface veneer. Gray has none — the surface is completely uniform from panel to panel, like a painted or plastered surface. This makes it the most contemporary and precisely controlled option in the collection.

Q: Can I touch up cut edges?

A: Yes — because Gray is a solid color, cut edges can be touched up with a matching gray paint for a clean finish at wall edges, corners, and around outlets.

Q: What is the Sleek 7-grid profile?

A: The Sleek profile uses seven narrow slats (9.5mm wide) per panel with low, shallow ridges. It produces a finer, more subtle texture than the bold 4-grid Stout profile. At 7/16" thick, it's one of the slimmest profiles in the collection. On a solid-color finish like Gray, the slat shadow lines are the primary visual element — clean geometry without any grain to distract from the pattern.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Gray and are ready to install straight from the box. No painting, staining, or sealing required.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Is there a minimum order?

A: No minimum on the 94.5" length. The 106" length has a 15-box minimum order. A sample is available before committing to a full order.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, the panels are water-resistant. Designed for interior use only; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.