Black 7 Grid Slat Wood Wall Panels - 94.5" - 106" Long x 5 3/4" Width

Black 7 Grid Slat Wood Wall Panels

Seven Slats Per Panel. Deep Matte Black Finish. Bold Texture, Ready to Install.

Make a statement with our Black 7 Grid Slat Wood Wall Panels — pre-finished in a deep, rich matte black with seven narrow slats per panel for a finer, denser surface pattern. Where the 4-grid Stout profile uses four bold slats for a strong architectural shadow effect, the 7-grid format packs seven slimmer slats across the panel width, creating a more subtle, layered texture that adds depth and dimension without overpowering the space. The Black finish is pre-applied at the factory, so panels arrive ready to install with no painting or sealing required.

Available in 94.5" and 106" lengths with 4 panels per box. The seamless panel-to-panel connection leaves no visible joint lines, giving the finished wall a clean, built-in look from edge to edge.

Key Features

• 7-slat ridge pattern per panel for finer, denser surface texture
• Pre-finished in deep matte Black with a smooth laminate surface
• Ready to install — no painting or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 0.5" thickness
• 4 panels per box for both 94.5" and 106" lengths
• Scratch-resistant laminate surface finish
• Install horizontally or vertically on walls or ceilings
• Cut to fit with standard woodworking tools
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Black

Black is the most dramatic finish in the slat wall lineup. Against light walls, white trim, and pale furnishings, a black slat panel wall creates maximum contrast — it anchors the space, commands the room, and reads as confident and intentional. Against darker interior palettes, black-on-black creates depth and tonal richness that no lighter finish can match. The 7-grid slat pattern amplifies this effect: seven narrow slats per panel mean more shadow lines per square foot, giving the wall a finely textured surface that catches light across its ridges and adds three-dimensional depth even in low-contrast settings. It's the format for spaces that should feel bold, sophisticated, and completely designed — not accidental. Home theaters, executive offices, boutique retail, restaurant interiors, and high-end residential spaces all benefit from what a black slat wall brings to a room.

• Home theaters and media rooms
• Executive offices and boardrooms
• Living rooms and bedroom accent walls
• Bars, restaurants, and hospitality interiors
• Hotel lobbies and boutique retail spaces
• Commercial offices and conference rooms

4 Grid vs. 7 Grid: Which Slat Pattern Is Right for Your Project?

Product Specifications

Box Options

Coverage Calculator

94.5" Length (15.1 sq ft per box)

106" Length (17.6 sq ft per box — 15-box minimum)

How to Install Black 7 Grid Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. A properly prepared surface ensures the adhesive bonds securely and the panels stay flat over time.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The precision panel design creates a seamless connection with no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a circular saw, miter saw, or fine-tooth hand saw. Measure carefully before each cut to maintain clean edges.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Black surface requires no additional finishing — the installation is complete.

Black 7 Grid Slat Wood Wall Panels Gallery

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA

Frequently Asked Questions

Q: What does the Black finish look like?

A: The Black finish is a deep, rich matte black with a smooth laminate surface. It creates maximum contrast against light walls and furnishings, and adds dramatic depth in darker interior palettes. The 7-grid slat pattern gives the surface a refined, layered texture that catches light subtly across the narrow ridges.

Q: How does the 7 Grid pattern differ from the 4 Grid (Stout)?

A: The 4 Grid Stout uses four wider slats per panel, creating bold, well-defined shadow lines. The 7 Grid packs seven narrower slats across the same width, producing a finer, more subtle texture. The 4 Grid reads as more architectural and dramatic; the 7 Grid is quieter and more refined, letting the color carry the visual weight.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Black and are ready to install straight from the box. No painting or sealing required.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Is there a minimum order?

A: No minimum on the 94.5" length. The 106" length has a 15-box minimum order. A sample is available before committing to a full order.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, the panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.