Rounded Light Oak Slat Wood Wall Panels - 94" Long x 5 3/4" Width

Rounded Light Oak Slat Wood Wall Panels

Five Rounded Slats Per Panel. Pre-Finished Light Oak. Ready to Install.

Bring warm, natural character to any interior with our Rounded Light Oak Slat Wood Wall Panels. These solid wood panels arrive pre-finished in a light, pale oak tone — no staining, painting, or sealing required. Five gently rounded slats per panel create a pronounced 3D texture that casts rich shadow lines and gives the wall an organic, sculpted depth that flat panels cannot match. The pale Light Oak finish is natural and understated, letting the rounded slat profile do the work without overpowering the room. Install horizontally or vertically and achieve a finished feature wall in hours.

Available in 94.5" length with 3 panels per box. Panels connect seamlessly with no visible joint lines for a clean, built-in look from edge to edge.

Key Features

• 5 rounded slats per panel — pronounced 3D texture with organic, sculpted edges
• Pre-finished Light Oak — pale, natural tone ready to install straight from the box
• Solid wood construction — genuine wood character with natural grain variation
• No staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 6" wide panels, 0.8" thick
• 94.5" length, 3 panels per box
• 12 sq ft coverage per box
• Water resistant
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Light Oak

Light Oak is the most versatile finish in the rounded slat lineup. The pale, natural tone works as a neutral backdrop that opens up a space without going stark white, and reads equally well in Scandinavian, transitional, contemporary, and coastal interiors. The rounded slat profile adds a layer of organic warmth that straight-edged panels lack — the curved edges catch light at a different angle, producing softer, more gradual shadows that make the wall feel handcrafted rather than machined. Because it ships pre-finished, all the work is done. Hang it straight from the box and your feature wall is complete. For those who want a fully customizable finish, see our Rounded Unfinished Oak panels in the same profile.

• Living rooms and feature walls — warm, neutral backdrop with rich 3D texture
• Bedrooms — natural wood warmth without going dark or heavy
• Home offices — calm, natural, and focused
• Dining rooms — pale oak tone that pairs with almost any furniture
• Hotels, boutiques, and commercial interiors — refined, natural finish at scale
• Hallways and entryways — welcoming first impression with architectural depth

Compare Rounded Slat Finishes

Compare Slat Profile Styles

Product Specifications

Box Options

Coverage Calculator

94.5" Length (12 sq ft per box)

How to Install Rounded Light Oak Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut and keep the slat lines aligned for a consistent pattern.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Light Oak surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What does Light Oak look like?

A: Light Oak is a pale, natural wood tone — warm but understated, with a soft grain character. It reads as a neutral that works in almost any room. Order a sample swatch to see it in your actual space under your lighting before committing to full boxes.

Q: What is the rounded slat profile?

A: Each panel has 5 slats with gently curved (rounded) top edges rather than flat faces. The rounded profile creates a softer, more organic shadow line compared to a square-edged flat slat, giving the wall a handcrafted, sculpted look that flat profiles cannot match.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Light Oak and are ready to install straight from the box. No painting, staining, or sealing required.

Q: What if I want a custom color?

A: See our Rounded Unfinished Oak panels, which are the same profile in raw, unfinished solid wood ready to accept any stain, paint, or clear coat you choose.

Q: Are end caps included?

A: No end caps are included. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, these panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.