Rounded Oak Brown Slat Wood Wall Panels - 94" Long x 5 3/4" Width

Rounded Oak Brown Slat Wood Wall Panels

Five Rounded Slats Per Panel. Pre-Finished Oak Brown. Rich, Warm Tone Ready to Install.

Add depth, warmth, and architectural texture to any interior with our Rounded Oak Brown Slat Wood Wall Panels. These solid wood panels arrive pre-finished in a rich, warm Oak Brown — deeper and darker than Light Oak, with a genuine wood warmth that anchors a room without going heavy or stark. Five gently rounded slats per panel create a pronounced 3D texture, with the curved edges casting soft, organic shadow lines that flat-faced profiles simply cannot replicate. The Oak Brown finish makes those shadows read even deeper, enhancing the dimensionality of the wall. No staining, painting, or sealing required — install straight from the box.

Available in 94.5" length with 3 panels per box. Panels connect seamlessly with no visible joint lines for a clean, built-in look from edge to edge.

Key Features

• 5 rounded slats per panel — pronounced 3D texture with organic, sculpted edges
• Pre-finished Oak Brown — rich, warm brown tone ready to install straight from the box
• Solid wood construction — genuine wood character with natural grain variation
• No staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 6" wide panels, 0.8" thick
• 94.5" length, 3 panels per box
• 12 sq ft coverage per box
• Water resistant
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Oak Brown

Oak Brown hits the sweet spot between natural and dramatic. It is noticeably richer and warmer than Light Oak, but it reads as a natural wood tone rather than a stained or painted finish — the kind of color that feels like it belongs in the wood, not on top of it. In a room with lighter walls, furniture, or flooring, Oak Brown creates a strong, grounded contrast. In a room that already leans warm and earthy, it blends seamlessly. The rounded slat profile amplifies the effect: each slat catches light differently across its curved face, producing soft gradients and layered shadow rather than hard lines. The result is a wall that feels crafted and substantial, not just decorated. If Light Oak feels too understated and Unfinished requires too much preparation, Oak Brown is the right call.

• Living rooms and feature walls — rich, grounded backdrop with sculptural depth
• Home offices — warm and focused without going dark
• Bedrooms — cozy, enveloping warmth behind a headboard
• Dining rooms — wood warmth that complements natural materials and earthy tones
• Hotels, restaurants, and commercial interiors — a welcoming, high-end natural finish
• Hallways and entryways — bold first impression with organic depth

Compare Rounded Slat Finishes

Compare Slat Profile Styles

Product Specifications

Box Options

Coverage Calculator

94.5" Length (12 sq ft per box)

How to Install Rounded Oak Brown Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut and keep the slat lines aligned for a consistent pattern.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Oak Brown surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What does Oak Brown look like?

A: Oak Brown is a rich, warm wood tone — deeper and darker than Light Oak, with a natural earthiness that reads as genuine wood rather than a stained surface. It is warm without being too dark, and grounded without being heavy. Order a sample swatch to see it under your actual lighting before committing to full boxes.

Q: What is the rounded slat profile?

A: Each panel has 5 slats with gently curved (rounded) top edges rather than flat faces. The rounded profile creates a softer, more organic shadow line compared to a square-edged flat slat, giving the wall a handcrafted, sculpted look that flat profiles cannot match.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Oak Brown and are ready to install straight from the box. No painting, staining, or sealing required.

Q: What is the difference between Oak Brown and Light Oak?

A: Light Oak is pale and understated — a neutral that opens up a space. Oak Brown is richer, warmer, and deeper — it adds visual weight and warmth to a room. Both are the same rounded solid wood profile. Order swatches of both to compare in your space before deciding.

Q: What if I want a fully custom color?

A: See our Rounded Unfinished Oak panels — the same profile in raw, unfinished solid wood, ready to accept any stain, paint, or clear coat you choose.

Q: Are end caps included?

A: No end caps are included. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, these panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.