Rounded Unfinished Slat Wood Wall Panels - 94" Long x 5 3/4" Width

Rounded Unfinished Oak Slat Wood Wall Panels

Five Rounded Slats Per Panel. Raw Solid Oak. Paint or Stain Grade.

Take full creative control with our Rounded Unfinished Oak Slat Wood Wall Panels. These solid oak panels arrive raw and unfinished, ready to accept any stain, paint, varnish, or clear coat you choose. Five gently rounded slats per panel create a pronounced 3D texture that casts deep shadow lines across the wall and adds architectural depth to any room. The rounded profile softens the slat edges for a more organic, sculpted look compared to flat-faced panels. Because every panel is unfinished, you decide the final color, sheen, and character — match existing trim, complement cabinetry, or create a one-of-a-kind statement wall in any finish the room calls for.

Available in 94.5" length with 3 panels per box. Solid oak construction ensures the panels hold stain evenly and accept paint or clear coat beautifully — paint grade and stain grade quality.

Key Features

• 5 rounded slats per panel — pronounced 3D texture with organic, sculpted edges
• Solid oak construction — paint grade and stain grade quality
• Arrives completely unfinished — apply any stain, paint, varnish, or clear coat
• Full creative control: match any existing trim, furniture, or room palette
• 6" wide panels, 3/4" thick
• 94.5" length, 3 panels per box
• 12 sq ft coverage per box
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Rounded Unfinished Oak

Most slat wood wall panels come pre-finished — which is convenient, but locks you into one color. The Rounded Unfinished Oak panel gives you the texture and depth of a slat wall with complete freedom over the final look. Stain it to match white oak floors, paint it to match trim or cabinetry, apply a dark walnut stain for a rich, moody feature wall, or seal it with a clear matte coat to let the natural oak grain show through. The rounded slat profile adds an extra layer of dimensionality: the curved edges catch light differently than square-edged profiles, creating softer shadows and a more handcrafted feel. Solid oak means the stain penetrates into real wood grain — not a veneer or a printed surface — so the result looks and ages like genuine wood.

• Living rooms and feature walls — custom-colored focal point in any room palette
• Bedrooms — match the wall color to bedding, trim, or furniture exactly
• Home offices — stain dark for a moody, focused environment
• Kitchens and dining rooms — paint to coordinate with cabinetry
• Hotels, restaurants, and commercial interiors — specify any color at any scale
• Renovation and remodel projects — blend seamlessly with existing finishes

Compare Slat Profile Styles

Product Specifications

Box Options

Coverage Calculator

94.5" Length (12 sq ft per box)

How to Install Rounded Unfinished Oak Slat Wood Wall Panels

These panels are best finished before installation so all surfaces — including edges and the back of each slat channel — receive full coverage. Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Finish the Panels First

Apply your chosen stain, paint, or clear coat before installation. Finishing the panels flat before mounting ensures full coverage of all slat faces, rounded edges, and channel grooves. Follow the finish manufacturer's recommended dry time before handling and installing.

Step 2: Prepare the Wall Surface

The wall must be clean, dry, and flat. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 3: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 4: Dry Fit the Panels

Before applying adhesive, place the finished panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 5: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 6: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 7: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 8: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut. Touch up any cut edges with your chosen finish to match the rest of the panel.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: Are these panels pre-finished?

A: No — these panels arrive completely raw and unfinished. That is the point. Apply any stain, paint, varnish, or clear coat to achieve the exact color and sheen you want. Order a 6" swatch first to test your finish under your actual lighting before committing to full boxes.

Q: What type of stain or paint works best?

A: Solid oak accepts oil-based and water-based stains very well. For a natural wood-grain look, use a penetrating oil or wiping stain. For a solid color, apply a primer coat first, then your topcoat. For a protective clear finish, a water-based polyurethane or hardwax oil works well. We recommend testing your chosen finish on a swatch before applying to all panels.

Q: Should I finish the panels before or after installation?

A: Before installation is strongly recommended. Finishing the panels flat on a workbench ensures all surfaces — including the rounded slat edges and the grooves between slats — receive full, even coverage. Finishing after installation makes it much harder to reach into the channels evenly.

Q: What is the rounded slat profile?

A: Each panel has 5 slats with gently curved (rounded) top edges rather than flat faces. The rounded profile creates a softer, more organic shadow line compared to a square-edged flat slat, and gives the wall a handcrafted, sculpted look.

Q: Is this the same wood as your pre-finished Stout panels?

A: Both are solid wood, but the profiles are different. The pre-finished Stout panels have 4 wide, flat-faced slats. The Rounded Unfinished panels have 5 slats with rounded edges and a slightly wider panel width of 6". The rounded profile is its own distinct look.

Q: Are end caps included?

A: No end caps are included. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount. Finish the panels before installation so all surfaces are sealed.

Q: Can these be used outdoors?

A: These panels are designed for interior use. With the right exterior-grade finish applied, they may be suitable for covered outdoor spaces — contact our team to discuss your specific application before purchasing.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.