4 Grid Warm Maple Black Gap MDF Slat Wall Panels

4 Grid Warm Maple Black Gap MDF Slat Wall Panels - 94.5" Long & 106" long

Four Bold Slats Per Panel. Warm Maple Veneer with Black Gap. Rich Natural Tone, Ready to Install.

Add warmth, depth, and architectural character to any interior with our 4 Grid Warm Maple Black Gap MDF Slat Wall Panels. These panels feature four wide, bold slats per panel in a warm golden-brown Warm Maple finish, with defined black gaps running between each slat for a sharp two-tone contrast. Where White Maple and White Oak read light and cool, Warm Maple brings genuine warmth — a rich, honey-golden tone that anchors a room without going dark or heavy. The MDF construction delivers a flat, stable, consistent surface with no warping and no grain variation from panel to panel. Pre-finished at the factory, these panels install straight from the box with no staining, painting, or sealing required.

Available in 94.5" and 106" lengths with 3 panels per box. The panels join seamlessly with no visible joint lines for a clean, built-in look from edge to edge.

Key Features

• 4-grid Stout slat pattern — 4 wide, bold slats per panel with pronounced 3D depth
• Black gap between each slat for sharp, high-contrast two-tone definition
• Pre-finished Warm Maple wood veneer — rich golden-brown tone, ready to install
• MDF core with durable warm maple wood veneer surface — flat, stable, consistent panel to panel
• Ready to install — no staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 7/8" thickness
• 3 panels per box for both 94.5" and 106" lengths
• Water resistant
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why Warm Maple

Warm Maple sits in the sweet spot of the MDF Black Gap lineup — richer and deeper than White Maple and White Oak, but lighter and more approachable than Chestnut. The warm golden-brown tone has the classic appeal of natural wood without the variability of real grain, delivering a consistent, controlled look that works across traditional, transitional, and contemporary interiors. The black gap runs a sharp dark line between each slat, creating a high-contrast graphic pattern that makes the warm wood color pop rather than fade into the wall. If you want the warmth of natural wood aesthetics with the precision and stability of an engineered panel, Warm Maple is the right choice.

• Living rooms and feature walls — warm, inviting backdrop with architectural texture
• Dining rooms — rich wood tone that elevates the room
• Bedroom accent walls — warmth and depth behind a headboard
• Home offices — professional, warm, and focused
• Hotels, restaurants, and hospitality interiors — a welcoming, high-end finish
• Hallways and entryways — warm first impression with defined slat lines

Compare 4 Grid MDF Black Gap Colors

4 Grid vs. 7 Grid: Which Slat Pattern Is Right for Your Project?

Product Specifications

Box Options

Coverage Calculator

94.5" Length (8.25 sq ft per box)

106" Length (12.65 sq ft per box)

How to Install 4 Grid Warm Maple Black Gap MDF Slat Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut and keep the black gap lines aligned for a consistent pattern.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Warm Maple surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What does the Warm Maple finish look like?

A: Warm Maple is a rich golden-brown tone — warmer and deeper than White Maple or White Oak, but lighter and more approachable than Chestnut. It has the classic warmth of natural maple wood without grain variation, thanks to the consistent MDF veneer surface. Order a sample to see it in your space under your actual lighting before committing to full boxes.

Q: What is MDF and how does it compare to solid wood?

A: MDF (Medium Density Fiberboard) is an engineered wood product with a warm maple wood veneer surface applied to a flat, stable MDF core. It delivers consistent color and flatness from panel to panel with no grain variation or warping risk. For a pre-finished, installation-ready panel, MDF with wood veneer is an excellent choice.

Q: What is the black gap?

A: The black gap is a defined dark channel between each of the four slats. It creates a sharp visual boundary between each slat, making the 3D ridge pattern graphic and high-contrast against the warm maple surface.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in Warm Maple with black gaps and are ready to install straight from the box. No painting, staining, or sealing required.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, these panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.