4 Grid White Maple Black Gap MDF Slat Wall Panels

4 Grid White Maple Black Gap MDF Slat Wall Panels - 94.5" Long & 106" long

Four Bold Slats Per Panel. White Maple with Black Gap Finish. High-Contrast Architectural Texture, Ready to Install.

Bring a clean, high-contrast two-tone look to any interior wall with our 4 Grid White Maple Black Gap MDF Slat Wall Panels. These panels feature four wide, bold slats per panel in a pale white maple finish with defined black gaps running between each slat — the black gap frames every slat sharply, creating a graphic, architectural pattern that reads clearly from across the room. The MDF construction delivers a flat, stable, consistent panel-to-panel surface with no grain variation and no warping. Pre-finished at the factory, these panels install straight from the box with no staining, painting, or sealing required.

Available in 94.5" and 106" lengths with 3 panels per box. The panels join seamlessly with no visible joint lines for a clean, built-in look from edge to edge.

Key Features

• 4-grid Stout slat pattern — 4 wide, bold slats per panel with pronounced 3D depth
• Black gap between each slat for sharp, high-contrast two-tone definition
• Pre-finished White Maple surface — pale, consistent finish, no grain variation
• MDF construction — flat, stable, and dimensionally consistent panel to panel
• Ready to install — no staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 7/8" thickness
• 3 panels per box for both 94.5" and 106" lengths
• Water resistant
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why White Maple with Black Gap

The White Maple Black Gap panel is the high-contrast option in the Stout 4-grid lineup. The pale white maple surface creates a light, open tone; the black gaps between slats pull the eye to the slat boundaries and make the 3D ridge pattern unmissable. The result is a wall that feels both contemporary and architectural — the kind of pattern that works in modern, Scandinavian, minimalist, and industrial interiors where clean lines and defined geometry are the design language. The MDF substrate adds practical advantages too: completely flat with no grain variation, consistent color from panel to panel, and no risk of the warping or checking that can occur in natural solid wood. For spaces where you want a precise, controlled result with maximum contrast, this is the panel.

• Living rooms and feature walls — graphic two-tone backdrop with strong visual presence
• Home offices and conference rooms — contemporary, focused, clean
• Bedroom accent walls — bold contrast behind a headboard
• Kitchens with white or light cabinetry — consistent finish that ties the room together
• Hotels, showrooms, and commercial interiors — a refined, repeatable finish at scale
• Hallways and entryways — dramatic first impression, defined slat lines

Compare 4 Grid MDF Black Gap Colors

4 Grid vs. 7 Grid: Which Slat Pattern Is Right for Your Project?

Product Specifications

Box Options

Coverage Calculator

94.5" Length (8.25 sq ft per box)

106" Length (12.65 sq ft per box)

How to Install 4 Grid White Maple Black Gap MDF Slat Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut. Keep the black gap lines aligned as you work for a consistent pattern.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished White Maple surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What is MDF and how does it differ from solid wood panels?

A: MDF (Medium Density Fiberboard) is an engineered wood product made from compressed wood fibers and resin. It's completely flat and dimensionally stable — no grain variation, no warping, consistent color panel to panel. Solid wood panels offer natural grain character and accept stain differently; MDF panels offer a more uniform, controlled surface. For a pre-finished, uniform white maple look with no grain variation, MDF is the right choice.

Q: What is the black gap exactly?

A: The black gap is a defined dark channel between each of the four slats. It creates a sharp visual boundary between each slat, making the 3D ridge pattern graphic and high-contrast. The white maple surface against the black gap lines is the defining feature of this panel.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished in White Maple with black gaps and are ready to install straight from the box. No painting, staining, or sealing required.

Q: Can these be painted?

A: Yes, MDF accepts paint well. The pre-finished surface may need light sanding or a primer coat first for best adhesion. Contact our team for finishing recommendations specific to your project.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, these panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Can these be installed on exterior walls?

A: No — interior use only. MDF is not suited for outdoor environments where exposure to moisture, heat, and cold could cause damage.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.