4 Grid White Oak Black Gap MDF Slat Wall Panels

4 Grid White Oak Black Gap MDF Slat Wall Panels - 94.5" Long & 106" long

Four Bold Slats Per Panel. White Oak Veneer with Black Gap. High-Contrast Architectural Texture, Ready to Install.

Make a statement with our White Oak with Black Accent Stout Slat Wood Wall Panels — a two-tone wall panel that pairs the natural warmth of white oak with the precision of black accent strips running between each slat. The Stout profile uses four wide, pronounced slats per panel with thick ridges that create strong shadow lines and a bold 3D effect. The black strips sit between the slats, framing each one and sharpening the contrast between the wood grain and the dark dividers. The result is a wall with real architectural presence — the warmth of natural wood with the graphic clarity of a high-contrast design.

Available in 94.5" and 106" lengths with 3 panels per box. Order a sample first — the white oak grain and black accent combination looks different under warm vs. cool lighting, and seeing it in your actual space before committing to full boxes is always worth it.

Key Features

• Stout 4-grid slat pattern — 4 wide, bold slats per panel for strong shadow lines and 3D depth
• Black accent strips between each slat — high-contrast two-tone architectural finish
• Pre-finished white oak wood veneer with natural grain — warm, refined, and ready to install
• MDF core with durable white oak wood veneer surface — flat, stable, and consistent panel to panel
• Ready to install — no staining, painting, or sealing required
• Seamless panel-to-panel connection with no visible joint lines
• 5¾" wide panels with 7/8" thickness
• 3 panels per box for both 94.5" and 106" lengths
• Install horizontally or vertically on walls or ceilings
• Cut to fit with a miter saw, circular saw, or jigsaw
• Suitable for residential and commercial applications
• Ships from San Diego, CA

Why White Oak with Black Accents

The standard White Oak Stout panel is already a strong look — bold Stout ridges, natural oak grain, pronounced 3D shadow effect. The Black Accent version takes that same panel and adds black strips between each slat, turning the groove lines from a shadow effect into a hard, defined graphic element. The contrast between the pale warm wood and the dark dividers is the point: it sharpens the slat pattern, adds visual precision, and gives the wall a two-tone quality that works equally well in contemporary, Scandinavian, industrial, and transitional interiors. The Stout profile is the right choice when you want the wall to make a real statement — wider slats, deeper ridges, bolder shadow lines than the 7-grid Sleek profile. Add the black accents and the statement becomes architectural rather than simply textural.

• Living room feature walls — bold two-tone backdrop for furniture and artwork
• Bedroom accent walls — warm oak grain with graphic contrast behind a headboard
• Home offices — contemporary, focused, visually strong
• Dining rooms — high-contrast texture that elevates the room
• Hotels, restaurants, and hospitality interiors — a distinctive, premium commercial finish
• Hallways and entryways — making a first impression with real architectural character

Compare 4 Grid MDF Black Accent Colors

4 Grid vs. 7 Grid: Which Slat Pattern Is Right for Your Project?

Product Specifications

Box Options

Coverage Calculator

94.5" Length (11.3 sq ft per box)

106" Length (12.7 sq ft per box — 15-box minimum)

How to Install White Oak with Black Accent Stout Slat Wood Wall Panels

Installation is straightforward and can be completed by most DIY homeowners and contractors in a few hours.

Step 1: Prepare the Wall Surface

The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. For uneven walls, install a batten system first to create a flat mounting surface.

Step 2: Measure the Wall Area

Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall to guide the first panel and keep the installation straight.

Step 3: Dry Fit the Panels

Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced result before anything is permanent.

Step 4: Apply Construction Adhesive

Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel. Ensure even distribution for a strong, uniform bond. Keep adhesive away from the edges to prevent squeeze-out onto the finished surface.

Step 5: Install the First Panel

Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. Use a level to confirm it is perfectly straight before moving on.

Step 6: Continue Panel by Panel

Place each subsequent panel directly against the previous one. The seamless design creates no visible joint lines. Check alignment with a level periodically as you work across the wall.

Step 7: Cut to Fit

At wall edges, corners, outlets, and fixtures, trim panels using a miter saw, circular saw, or fine-tooth jigsaw. Measure carefully before each cut to keep the black accent strips aligned.

Step 8: Final Check

Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished White Oak with Black Accent surface requires no additional finishing — the installation is complete.

Why YouShouldHaveIt

• Ships from San Diego, CA warehouse
• In-stock — same or next business day shipping
• Volume discounts automatically applied at checkout
• Expert team: (858) 261-4068, Mon–Fri 8am–4pm
• Retail showroom in Santee, CA — see the panels in person before you buy

Frequently Asked Questions

Q: What are the black accents exactly?

A: The black accents are thin black strips that run between each slat along the full length of the panel. They sit in the groove between slats, creating a crisp dark line that contrasts with the natural white oak on either side. The effect is a two-tone panel where the slat boundaries are defined by color rather than just shadow.

Q: What is MDF and how does it compare to solid wood?

A: MDF (Medium Density Fiberboard) is an engineered wood product with a white oak wood veneer surface applied to a flat, stable MDF core. It delivers consistent color and flatness from panel to panel with no grain variation or warping risk. Solid wood panels offer more natural grain character; MDF veneer panels offer a more uniform, controlled surface. For a pre-finished, installation-ready panel, MDF with wood veneer is an excellent choice.

Q: What is the Stout profile?

A: Stout is our bold 4-grid slat design — four wide, pronounced slats per panel with thick ridges that create strong, deep shadow lines. It's the most architecturally dramatic option in the collection. Compare it to the 7 Grid Sleek profile, which uses seven narrower slats for a finer, more subtle texture.

Q: Is this panel pre-finished?

A: Yes — these panels arrive pre-finished with white oak veneer and black accent strips, ready to install straight from the box. No staining, painting, or sealing required.

Q: Are end caps included?

A: No end caps are included with either length. Contact our team at (858) 261-4068 for edge finishing options for your project.

Q: Is there a minimum order?

A: No minimum on the 94.5" length. The 106" length has a 15-box minimum order. A sample is available before committing to a full order.

Q: Can these be installed on ceilings?

A: Yes. Use adhesive and screws for ceiling installations. Drive fasteners into solid framing for a secure overhead mount.

Q: Are these panels water resistant?

A: Yes, the panels are water-resistant. Designed for interior use; not rated for exterior or wet-area applications.

Q: Do these panels help with sound?

A: These are cladding panels, not acoustic panels. The slatted surface helps diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.

Q: Is free shipping included?

A: Yes — free shipping within the contiguous United States.

Q: Do you have a showroom?

A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday–Friday, 8am–4pm.