Light Brown Wide-Slat Wood Wall Panels - Broad Profile Solid Wood Wall Paneling
Real Solid Wood. Widest Slats Available. Pre-Finished Light Brown Ready to Install.
Transform any interior wall with our Light Brown Wide-Slat Wood Wall Panels — real solid wood cladding panels in the Broad profile, pre-finished in a warm medium brown tone and featuring the widest individual slats in the entire lineup. At 1-1/16" per slat, the Broad format creates deeper shadow lines and a more pronounced three-dimensional wall effect than any of the narrower slat profiles. The Light Brown finish is applied at the factory, so panels arrive ready to go straight onto the wall — no staining, painting, or sealing required.
Each box contains 3 panels covering 10 square feet. The 5" wide panel and thick 7/8" profile give each plank substantial visual weight. Available in a 94" length to suit standard ceiling heights.
Key Features
- Real solid wood construction — not MDF or veneer
- Pre-finished in warm Light Brown — a rich, natural medium-brown tone, ready to install
- Widest slats available: 1-1/16" per slat — deeper shadow lines and stronger 3D texture
- 5" wide panels with 7/8" thickness for substantial visual presence
- Seamless panel-to-panel connection — no visible joint lines
- Water-resistant material
- Install horizontally or vertically on any wall surface
- Cut to fit with standard woodworking tools
- Suitable for residential and commercial applications
- Ships from San Diego, CA
Why Light Brown Broad
Light Brown sits between the pale warmth of Light Oak and the deep richness of darker walnut finishes — a medium-toned brown with natural grain character that reads as grounded and sophisticated without being heavy. It pairs well with warm whites, soft creams, earthy tones, and natural stone. The Broad profile pushes that character further by pairing the warm finish with the widest individual slats available: fewer, wider planks mean deeper grooves between them and a more architectural, structural quality. From across the room, the Broad profile has more visual mass per panel. Up close, the shadow lines are sharper and more defined. The pre-finished surface means no finishing work — unbox, cut, and install.
- Living room and bedroom accent walls
- Home offices and executive spaces
- Dining rooms and entryways with warm, earthy palettes
- Bars, restaurants, and hospitality interiors
- Hotel lobbies and boutique retail spaces
- Conference rooms and commercial environments
Light Oak vs. Light Brown: Which Finish Is Right for Your Space?
| Finish |
Tone |
Works Best With |
Feel |
| Light Oak |
Pale honey, warm blonde |
White walls, soft grays, Scandinavian palettes |
Fresh, airy, natural |
|
Light Brown (this product) |
Warm medium brown, natural grain |
Warm whites, creams, earthy tones, natural stone |
Grounded, sophisticated, inviting |
Not sure which finish suits your space? Order a $2.99 sample of each and compare in your actual lighting before committing.
Broad Profile in the Light Oak Family
| Profile |
Slat Format |
Panel Width |
Thickness |
Coverage per Box |
Best For |
| Standard Slat |
4-grid, solid slats |
5-3/4" |
3/4" |
12 sq ft |
Classic look, more coverage per box |
| 7 Grid |
7 narrow ridges per panel |
6" |
1/2" |
15.1 sq ft |
Fine texture, subtle depth, high coverage |
|
Wide-Slat Broad (this product) |
Widest slats available: 1-1/16" each |
5" |
7/8" |
10 sq ft |
Bold presence, deepest shadow lines, strongest 3D effect |
Product Specifications
| Specification |
Details |
| Material |
Solid Wood |
| Finish |
Light Brown — pre-finished, ready to install |
| Panel Width |
5" |
| Panel Length |
94" |
| Panel Thickness |
7/8" |
| Slat Width |
1-1/16" — widest slat available |
| Slat Depth |
1/4" |
| Slat Spacing |
1/2" |
| Panels per Box |
3 panels |
| Coverage per Box |
10 sq ft |
| Water Resistance |
Yes |
| Application |
Indoor — Walls |
| Installation |
Construction adhesive (Liquid Nails or similar) |
| Ships From |
San Diego, CA |
Coverage Calculator
94" Length (10 sq ft per box)
| Area to Cover |
Boxes Needed |
Notes |
| 50 sq ft |
~6 boxes |
Add 10% for cuts and waste |
| 100 sq ft |
~11 boxes |
Add 10% for cuts and waste |
| 200 sq ft |
~22 boxes |
Add 10% for cuts and waste |
| 300 sq ft |
~33 boxes |
Add 10% for cuts and waste |
How to Install Light Brown Wide-Slat Wood Wall Panels
Installation is a straightforward DIY process that most homeowners and contractors can complete in a few hours.
Step 1: Prepare the Wall Surface
The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. A properly prepared surface ensures the adhesive bonds securely and the panels stay flat over time.
Step 2: Measure the Wall Area
Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall — this guides the first panel and keeps the entire installation straight.
Step 3: Dry Fit the Panels
Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced, symmetrical result before anything is permanent.
Step 4: Apply Construction Adhesive
Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel in vertical lines. Keep adhesive away from the edges to prevent squeeze-out. Ensure even distribution for a strong, uniform bond.
Step 5: Install the First Panel
Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. The first panel sets the alignment for everything that follows — use a level to confirm it is perfectly straight before moving on.
Step 6: Continue Panel by Panel
Place each subsequent panel directly against the previous one. The precision panel design creates a seamless connection with no visible joint lines. Check alignment with a level periodically as you work across the wall.
Step 7: Cut to Fit
At wall edges, corners, outlets, and fixtures, trim panels using a circular saw, miter saw, or fine-tooth hand saw. Measure carefully before each cut. Solid wood cuts cleanly with standard woodworking tools.
Step 8: Final Check
Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Light Brown surface requires no additional finishing — the installation is complete.
Why YouShouldHaveIt
- Ships from San Diego, CA warehouse
- In-stock — same or next business day shipping
- Volume discounts at checkout
- Expert team: (858) 261-4068, Mon-Fri 8am-4pm
- Retail showroom in Santee, CA
Frequently Asked Questions
Q: What does Light Brown look like?
A: Light Brown is a warm, medium-toned wood finish with natural grain variation. It is richer and deeper than Light Oak — less blonde, more brown — but not a dark finish. Think of the warm brown tones you would find in quality oak flooring with a natural stain applied: grounded, inviting, and versatile. The deep grooves between the Broad-profile slats create strong shadow lines that add depth and movement to the surface.
Q: How does Light Brown compare to Light Oak?
A: Light Oak is the paler of the two — a honey-blonde tone that leans cooler and works especially well with white and gray palettes. Light Brown is warmer and slightly richer, sitting between Light Oak and medium walnut tones. If your space has warm whites, creams, beiges, or natural stone, Light Brown tends to integrate more naturally than Light Oak. If your space is cooler or more minimal, Light Oak is typically the better fit. Ordering a $2.99 sample of each is the most reliable way to compare in your actual space and lighting.
Q: Is this panel pre-finished or does it need staining after installation?
A: These panels arrive pre-finished in Light Brown — no staining, painting, or sealing required. Unbox, cut to fit, and install. If you want to change the color later, solid wood accepts paint and stain like any wood surface.
Q: How is this different from the Unfinished Wide-Slat panels?
A: The Unfinished Wide-Slat panels are raw solid wood — no finish applied, ready for your custom stain or paint. The Light Brown panels arrive with a factory-applied finish in a warm medium-brown tone and are ready to install as-is. Same profile, same slat width, same dimensions — the only difference is whether you finish them yourself or buy them ready to go.
Q: What is different about the Broad profile compared to the Standard and 7 Grid profiles?
A: The Broad has the widest individual slats at 1-1/16" each — wider than both the Standard (4-grid) and 7 Grid profiles. Wider slats mean fewer slats per panel, deeper grooves between them, and a bolder, more architectural shadow effect. The Standard profile sits in the middle of the range. The 7 Grid packs seven narrow ridges across the panel for the finest, most subtle texture. Choose Broad for maximum presence and depth; choose 7 Grid for refined, quiet texture; choose Standard for a balanced look in between.
Q: Is there only one length option?
A: Yes — the Wide-Slat Broad panels are available in 94" only. This length suits standard 8-foot ceiling heights and can be stacked or run horizontally for taller walls. Contact our team at (858) 261-4068 if you have questions about tall-wall installations.
Q: Can these panels be installed horizontally?
A: Yes — install horizontally or vertically depending on the look you want. Vertical installation emphasizes ceiling height. Horizontal installation creates a wider, more expansive feel. The wide slats read well in both orientations.
Q: Can the panels be cut to fit?
A: Yes. Use a circular saw, miter saw, or fine-tooth hand saw to trim panels around outlets, corners, or at wall edges. Solid wood cuts cleanly with standard woodworking tools.
Q: Are these panels water resistant?
A: Yes — the solid wood construction is water-resistant. These panels are designed for interior use; they are not rated for exterior or wet-area applications like bathrooms or outdoor walls.
Q: Do these panels help with sound?
A: These are cladding panels, not acoustic panels — they do not include sound-absorbing felt backing. The slatted wood surface does help diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.
Q: Is an end cap included?
A: The box contains 3 panels only — no end cap is included. Contact our team at (858) 261-4068 for edge finishing options for your project.
Q: What is the minimum order?
A: No minimum — order as many boxes as you need. A sample is available for $2.99 before committing to full boxes.
Q: Is free shipping included?
A: Yes — free shipping within the contiguous United States.
Q: Do you have a showroom?
A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday-Friday, 8am-4pm.
Explore More Products
Discover more premium home improvement solutions designed for durability, style, and performance.
