Light Oak Wide-Slat Wood Wall Panels - Broad Profile Solid Wood Wall Paneling
Real Solid Wood. Widest Slats Available. Pre-Finished Light Oak Ready to Install.
Transform any interior wall with our Light Oak Wide-Slat Wood Wall Panels — real solid wood cladding panels in the Broad profile, pre-finished in a warm natural light oak tone and featuring the widest individual slats in the entire lineup. At 1-1/16" per slat, the Broad format creates deeper shadow lines and a more pronounced three-dimensional wall effect than any of the narrower slat profiles. The Light Oak finish is applied at the factory, so panels arrive ready to go straight onto the wall — no staining, painting, or sealing required on your end.
Each box contains 3 panels covering 10 square feet. The 5" wide panel and thick 7/8" profile give each plank substantial visual weight. Available in a 94" length to suit standard ceiling heights.
Key Features
- Real solid wood construction — not MDF or veneer
- Pre-finished in natural Light Oak — warm honey-toned, ready to install
- Widest slats available: 1-1/16" per slat — deeper shadow lines and stronger 3D texture
- 5" wide panels with 7/8" thickness for substantial visual presence
- Seamless panel-to-panel connection — no visible joint lines
- Water-resistant material
- Install horizontally or vertically on any wall surface
- Cut to fit with standard woodworking tools
- Suitable for residential and commercial applications
- Ships from San Diego, CA
Why Light Oak Broad
Light Oak is the most universally versatile finish in the solid wood cladding lineup — a warm, honey-toned grain that pairs equally well with white walls, off-white plaster, warm beiges, and soft grays. The Broad profile pushes that look further by pairing it with the widest individual slats available. Fewer, wider slats with deep grooves between them means the wall reads as more architectural, more structural, and more dramatic than the finer-slat profiles. From across the room, the Broad profile has more visual mass per panel. Up close, the shadow lines between slats are deeper and more defined. The pre-finished Light Oak surface means no finishing work — unbox, cut, and install.
- Living room and bedroom accent walls
- Home offices and executive spaces
- Bars, restaurants, and hospitality interiors
- Hotel lobbies and boutique retail spaces
- Conference rooms and commercial environments
- Kitchen design features and media room walls
Light Oak Profile Comparison
| Profile |
Slat Format |
Panel Width |
Thickness |
Coverage per Box |
Best For |
| Standard Slat |
4-grid, solid slats |
5-3/4" |
3/4" |
12 sq ft |
Classic look, more coverage per box |
| 7 Grid |
7 narrow ridges per panel |
6" |
1/2" |
15.1 sq ft |
Fine texture, subtle depth, high coverage |
|
Wide-Slat Broad (this product) |
Widest slats available: 1-1/16" each |
5" |
7/8" |
10 sq ft |
Bold presence, deepest shadow lines, strongest 3D effect |
Not sure which profile fits your project? Order a $2.99 sample of each. Seeing the profiles side by side in your actual space makes the decision easy.
Product Specifications
| Specification |
Details |
| Material |
Solid Wood |
| Finish |
Light Oak — pre-finished, ready to install |
| Panel Width |
5" |
| Panel Length |
94" |
| Panel Thickness |
7/8" |
| Slat Width |
1-1/16" — widest slat available |
| Slat Depth |
1/4" |
| Slat Spacing |
1/2" |
| Panels per Box |
3 panels |
| Coverage per Box |
10 sq ft |
| Water Resistance |
Yes |
| Application |
Indoor — Walls |
| Installation |
Construction adhesive (Liquid Nails or similar) |
| Ships From |
San Diego, CA |
Coverage Calculator
94" Length (10 sq ft per box)
| Area to Cover |
Boxes Needed |
Notes |
| 50 sq ft |
~6 boxes |
Add 10% for cuts and waste |
| 100 sq ft |
~11 boxes |
Add 10% for cuts and waste |
| 200 sq ft |
~22 boxes |
Add 10% for cuts and waste |
| 300 sq ft |
~33 boxes |
Add 10% for cuts and waste |
How to Install Light Oak Wide-Slat Wood Wall Panels
Installation is a straightforward DIY process that most homeowners and contractors can complete in a few hours.
Step 1: Prepare the Wall Surface
The wall must be clean, dry, and flat before installation. Wipe away dust, fill any holes or cracks with wall filler, and let patched areas fully dry. A properly prepared surface ensures the adhesive bonds securely and the panels stay flat over time.
Step 2: Measure the Wall Area
Measure the height and width of your wall to calculate how many boxes you need. Add 10% for cuts and waste. Mark a level starting line on the wall — this guides the first panel and keeps the entire installation straight.
Step 3: Dry Fit the Panels
Before applying adhesive, place the panels against the wall to test the layout. Dry fitting lets you confirm alignment, identify where cuts are needed, and ensure a balanced, symmetrical result before anything is permanent.
Step 4: Apply Construction Adhesive
Apply a high-quality construction adhesive such as Liquid Nails to the back of the panel in vertical lines. Keep adhesive away from the edges to prevent squeeze-out. Ensure even distribution for a strong, uniform bond.
Step 5: Install the First Panel
Position the first panel against the wall using your level line as a guide. Press firmly and hold for several seconds. The first panel sets the alignment for everything that follows — use a level to confirm it is perfectly straight before moving on.
Step 6: Continue Panel by Panel
Place each subsequent panel directly against the previous one. The precision panel design creates a seamless connection with no visible joint lines. Check alignment with a level periodically as you work across the wall.
Step 7: Cut to Fit
At wall edges, corners, outlets, and fixtures, trim panels using a circular saw, miter saw, or fine-tooth hand saw. Measure carefully before each cut. Solid wood cuts cleanly with standard woodworking tools.
Step 8: Final Check
Once all panels are installed and adhesive has cured, inspect the wall for any gaps or misalignment. The pre-finished Light Oak surface requires no additional finishing — the installation is complete.
Why YouShouldHaveIt
- Ships from San Diego, CA warehouse
- In-stock — same or next business day shipping
- Volume discounts at checkout
- Expert team: (858) 261-4068, Mon-Fri 8am-4pm
- Retail showroom in Santee, CA
Frequently Asked Questions
Q: What does Light Oak look like?
A: Light Oak is a warm, natural honey-toned wood finish with visible grain variation. It is not yellow or orange — it sits in the range of quality hardwood flooring: warm, natural, and versatile across a wide range of interior palettes. The deep grooves between the Broad-profile slats create strong shadow lines that add depth and movement to the surface.
Q: Is this panel pre-finished or does it need staining after installation?
A: These panels arrive pre-finished in Light Oak — no staining, painting, or sealing required. Unbox, cut to fit, and install. If you want to change the color later, solid wood accepts paint and stain like any wood surface.
Q: How is this different from the Unfinished Wide-Slat panels?
A: The Unfinished Wide-Slat panels are raw solid wood — no finish applied, ready for your custom stain or paint. The Light Oak panels arrive with a factory-applied light oak finish and are ready to install as-is. Same profile, same slat width, same dimensions — the only difference is whether you finish them yourself or buy them ready to go.
Q: What is different about the Broad profile compared to the Standard and 7 Grid profiles?
A: The Broad has the widest individual slats at 1-1/16" each — wider than both the Standard (4-grid) and 7 Grid profiles. Wider slats mean fewer slats per panel, deeper grooves between them, and a bolder, more architectural shadow effect. The Standard profile sits in the middle of the range. The 7 Grid packs seven narrow ridges across the panel for the finest, most subtle texture. Choose Broad for maximum presence and depth; choose 7 Grid for refined, quiet texture; choose Standard for a balanced look in between.
Q: Is there only one length option?
A: Yes — the Wide-Slat Broad panels are available in 94" only. This length suits standard 8-foot ceiling heights and can be stacked or run horizontally for taller walls. Contact our team at (858) 261-4068 if you have questions about tall-wall installations.
Q: Can these panels be installed horizontally?
A: Yes — install horizontally or vertically depending on the look you want. Vertical installation emphasizes ceiling height. Horizontal installation creates a wider, more expansive feel. The wide slats read well in both orientations.
Q: Can the panels be cut to fit?
A: Yes. Use a circular saw, miter saw, or fine-tooth hand saw to trim panels around outlets, corners, or at wall edges. Solid wood cuts cleanly with standard woodworking tools.
Q: Are these panels water resistant?
A: Yes — the solid wood construction is water-resistant. These panels are designed for interior use; they are not rated for exterior or wet-area applications like bathrooms or outdoor walls.
Q: Do these panels help with sound?
A: These are cladding panels, not acoustic panels — they do not include sound-absorbing felt backing. The slatted wood surface does help diffuse sound reflections and reduce echo compared to a flat wall. For dedicated acoustic performance, see our Acoustic Wall Panel collection.
Q: Is an end cap included?
A: The box contains 3 panels only — no end cap is included. Contact our team at (858) 261-4068 for edge finishing options for your project.
Q: What is the minimum order?
A: No minimum — order as many boxes as you need. A sample is available for $2.99 before committing to full boxes.
Q: Is free shipping included?
A: Yes — free shipping within the contiguous United States.
Q: Do you have a showroom?
A: Yes — 10926 Woodside Ave Suite A, Santee, CA 92071. Monday-Friday, 8am-4pm.
Explore More Products
Discover more premium home improvement solutions designed for durability, style, and performance.
